Description
Holybro Durandal H7 Pixhawk4 PX4 flight controller with GPS
Durandal is a new flight controller designed by Holybro utilizing the STM32H7 microcontroller series.
As an increasing number of drone companies and developers need to run more powerful models and build on more embedded memory capabilities, Durandal is designed to offer a performance upgrade for development needs. The advantage will come in handy with intensive calculation features is required.
Harnessing from our extensive autopilot building experience in the past years, we have implemented a new vibration absorption system into the mechanical design of the hardware and integrated an IMU heater for sensors temperature control.
Durandal is pre-installed with PX4 and also supported by other flight stacks such as Ardupilot.
As an increasing number of drone companies and developers need to run more powerful models and build on more embedded memory capabilities, Durandal is designed to offer a performance upgrade for development needs. The advantage will come in handy with intensive calculation features is required.
Harnessing from our extensive autopilot building experience in the past years, we have implemented a new vibration absorption system into the mechanical design of the hardware and integrated an IMU heater for sensors temperature control.
Durandal is pre-installed with PX4 and also supported by other flight stacks such as Ardupilot.
Holybro Durandal Details
Technical Specifications
Main FMU Processor: STM32H743
32 Bit Arm ® Cortex®-M7, 480MHz, 2MB memory, 1MB RAM
IO Processor: STM32F100
32 Bit Arm ® Cortex®-M3, 24MHz, 8KB SRAM
On-board sensors
Accel/Gyro: ICM-20689
Accel/Gyro: BMI088
Mag: IST8310
Barometer: MS5611
GPS: U-Blox Neo-M8N GPS/GLONASS receiver; integrated
magnetometer IST8310
Electrical Data
Voltage Ratings:
Power module output: 4.9~5.5V
Max input voltage: 6V
Max current sensing: 120A
USB Power Input: 4.75~5.25V
Servo Rail Input: 0~36V
Mechanical Data
Dimensions:80*45*20.5mm
Weight: 68.8g
Item Packing
Durandal x 1
GPS Modul x 1
PM07 Power Management Board x 1
I2C splitter Board x 1
6 to 6 pin cable (power) x 5
4 to 4 pin cable (CAN) x 2
10 to 10 pin cable (CAP&ADC) x 2
7 to 7 pin cable(SPI) x 1
“Y”6 to 4 pin & 4 pin cable x 1
DSMX receiver cable x 1
PPM/SBUS out cable x 1
XSR receiver cable x 1
SBUS receiver cable x 1
USB (type-c)cable x 1
Foam Set x 1
Durandal Pinouts x 1
Power Management Board Quick Start Guide x 1
GPS Modul x 1
PM07 Power Management Board x 1
I2C splitter Board x 1
6 to 6 pin cable (power) x 5
4 to 4 pin cable (CAN) x 2
10 to 10 pin cable (CAP&ADC) x 2
7 to 7 pin cable(SPI) x 1
“Y”6 to 4 pin & 4 pin cable x 1
DSMX receiver cable x 1
PPM/SBUS out cable x 1
XSR receiver cable x 1
SBUS receiver cable x 1
USB (type-c)cable x 1
Foam Set x 1
Durandal Pinouts x 1
Power Management Board Quick Start Guide x 1
Caution:
- Storage Area temperature: Don’t put it beside the high-temperature condition or the temperature is over 70 ° C.
- Charging Caution: Don’t over-charge, or over-discharge batteries
- Keep away from kids that they can not get it.
- Flammable: Don’t throw it into the fire.
- Don’t throw it into the water.
FAQ
- How to use Lipo Battery in Drones, Planes, or RC Cars?
- Answer: Battery cable comes with a T-type Plug just install it with your toy and start playing.
- Why buy Batteries with Allrc? trusted customer across Pakistan.
- You can get updates on our Social Pages: Click here for More
- This is the best online store for hobbyists and students to buy the equipment for their projects online.
- This store provides free cash on delivery anywhere in Pakistan within 24 Hours you can also WhatsApp us and can search our page on fb as Allrc
Reviews
There are no reviews yet.