Description
Features
– Supports Betaflight and Cleanflight.
– Betaflight OSD. Change PIDs, adjust common configuration parameters, and change video transmitter channel and power level, all using your transmitter sticks and goggles.
– High-performance / low-noise IMU. MPU6000 with 6-axis gyro and accelerometer.
Ready for autonomous flight: Integrated BMP280 barometer and SCL/SDA for use with external GPS/magnetometer units.
– Dedicated bootloader button for easy firmware flashing.
– Low-profile design fits into even very compact frames.
Input voltage 7v to 42v. Power the board directly from the flight pack, up to 6S (on “B+” pad only).
– Automatic voltage monitoring. No need to run a separate vBat wire for voltage monitoring; the Kakute F4 V2 monitors voltage directly from the battery power lead.– On-board regulators output 9v at up to 2A to power DJI VTX.
– 6 PIN JST GH connector for DJI VTX.
– Supports BLHeli pass-through for easy ESC upgrade and configuration.
– 2 Additional PWM output, can be used for Camera control , motor5 or motor6 after resourced.
– Betaflight OSD. Change PIDs, adjust common configuration parameters, and change video transmitter channel and power level, all using your transmitter sticks and goggles.
– High-performance / low-noise IMU. MPU6000 with 6-axis gyro and accelerometer.
Ready for autonomous flight: Integrated BMP280 barometer and SCL/SDA for use with external GPS/magnetometer units.
– Dedicated bootloader button for easy firmware flashing.
– Low-profile design fits into even very compact frames.
Input voltage 7v to 42v. Power the board directly from the flight pack, up to 6S (on “B+” pad only).
– Automatic voltage monitoring. No need to run a separate vBat wire for voltage monitoring; the Kakute F4 V2 monitors voltage directly from the battery power lead.– On-board regulators output 9v at up to 2A to power DJI VTX.
– 6 PIN JST GH connector for DJI VTX.
– Supports BLHeli pass-through for easy ESC upgrade and configuration.
– 2 Additional PWM output, can be used for Camera control , motor5 or motor6 after resourced.
Holybro Kakute Details
– MCU: STM32F405RGT6 32-bit processor
– IMU: MPU6000 (SPI)
– Barometer: BMP280
– USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
– 5 hardware UARTS (UART1,3,4, 5, 6)
– Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.
128 Mbit Dataflash chip for Blackbox logging
– Dimensions: 36.8×36.8x8mm
– Mounting Holes: 30.5×30.5mm(M4)
– Weight: 7.4g
– IMU: MPU6000 (SPI)
– Barometer: BMP280
– USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
– 5 hardware UARTS (UART1,3,4, 5, 6)
– Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.
128 Mbit Dataflash chip for Blackbox logging
– Dimensions: 36.8×36.8x8mm
– Mounting Holes: 30.5×30.5mm(M4)
– Weight: 7.4g
Item Packing
FC board x 1
M3 Anti-Vibration Silicone Grommet Insert x 4
JST SH 8pin 150mm cable x 1
GHR 8pin to JST GHR 6pin 80mm cable x 1
JST GHR 8pin to JST GHR 6pin 150mm cable x 1
M3 Anti-Vibration Silicone Grommet Insert x 4
JST SH 8pin 150mm cable x 1
GHR 8pin to JST GHR 6pin 80mm cable x 1
JST GHR 8pin to JST GHR 6pin 150mm cable x 1
Caution:
- Storage Area temperature: Don’t put it beside the high-temperature condition or the temperature is over 70 ° C.
- Charging Caution: Don’t over-charge, or over-discharge batteries
- Keep away from kids that they can not get it.
- Flammable: Don’t throw it into the fire.
- Don’t throw it into the water.
FAQ
- How to use Lipo Battery in Drones, Planes, or RC Cars?
- Answer: Battery cable comes with a T-type Plug just install it with your toy and start playing.
- Why buy Batteries with Allrc? trusted customer across Pakistan.
- You can get updates on our Social Pages: Click here for More
- This is the best online store for hobbyists and students to buy the equipment for their projects online.
- This store provides free cash on delivery anywhere in Pakistan within 24 Hours you can also WhatsApp us and can search our page on fb as Allrc
Reviews
There are no reviews yet.